MR2 L4-132 2164cc 2.2L DOHC (5S-FE) (1993)
/Page-634001.png)
Valve Body: Service and Repair
Replacement
Fig. 5 Valve Body Bolt Identification.
Fig. 6 Valve Body Bolt Identification.
Fig. 7 Valve Body Bolt Identification.
Fig. 8 Valve Body Bolt Identification.
REMOVAL
1.
Clean area around pan, then drain transmission fluid, then remove engine undercover.
2.
Remove oil pan and gasket, then the oil strainer.
3.
Remove apply tube bracket attaching bolts, then the apply tube.
4.
Remove oil tubes using a suitable screwdriver, then the manual detent spring.
5.
On A131L models, remove manual valve, then the manual valve body.
6.
On models except A131L, disconnect solenoid connector.
7.
Remove valve body attaching bolts, then disconnect throttle cable.
8.
On models except 131L, disconnect manual valve connecting rod.
