toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Condenser Fan|Specifications|Page 5303 > < Condenser Fan|Specifications|Page 5301
Page 1
background image

Condenser Fan: Service and Repair

COOLING FAN MOTOR REMOVAL

1. REMOVE THESE PARTS:

a. Air intake connector.
b. Engine coolant reservoir tank.

2. REMOVE COOLING FANS

Radiator Fan:
a. Drain engine coolant.
b. Disconnect radiator upper hose.
c. Disconnect the connector.

d. Remove the 2 bolts and radiator fan.

Torque: 7.0 N.m (70 kgf.cm, 61 in.lbf)

Condenser Fan:
a. Disconnect the connector.

b. Remove the 3 bolts and condenser fan.

Torque: 7.0 N.m (70 kgf.cm, 61 in.lbf)

3. REMOVE COOLING FAN MOTOR

Radiator Fan:
a. Remove the nut and fan.
b. Disconnect the wire harness and connector from the fan shroud.

c. Remove the 3 screws and motor.

Condenser Fan|Specifications|Page 5303 > < Condenser Fan|Specifications|Page 5301