toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Blower Motor > < Wheel Fastener|Front|Page 5246
Page 1
background image

Air Door Cable: Adjustments

A/C CONTROL CABLES ADJUSTMENT

1. SET A/C CONTROL DIALS AND LEVER IN THESE CONDITIONS:

a. Air inlet control lever "RECIRC" position
b. Mode control dial "FACE" position
c. Temperature control dial COOL position

2. ADJUST AIR IN LET DAMPER CONTROL CABLE

Set the air inlet damper on "RECIRC" position and install the control cable and lock clamp.

3. ADJUST MODE DAMPER CONTROL CABLE

Set the air inlet damper on "FACE" position and install the control cable and lock the clamp.

4. ADJUST AIR MIX DAMPER CONTROL CABLE

Set the air mix damper on "COOL" position and install the control cable and lock the clamp.

Blower Motor > < Wheel Fastener|Front|Page 5246