Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1990)
(b) Using SST and a press, in a new bearing.
SST 09515-30010,09608-35014 (09608-06180)
6. INSTALL NEW OUTER OIL SEAL
-
Using SST and a hammer, tap in a new oil seal.
SST 09608-30012 (09608-04020, 09608-04070)
7. INSPECT BEARING CASE
-
Check for wear or damage.
-
If necessary, replace the bearing case.
8. REPLACE BEARING CASE
(a) Remove the oil seal and bearing.
(b) Install the nuts to the serrated bolts.
(c) Using a hammer, tap out the serrated bolts and remove the bearing case.
(d) Position the backing plate on a new bearing case and using 2 socket wrenches, press in the serrated bolts.
(e) Install a new bearing and oil seal.
9. INSPECT OIL SEAL
-
Check for wear or damage. If necessary, replace the oil seal.
10. REPLACE OIL SEAL
(a) Using SST, remove the oil seal.
SST 09308-00010
(b) Apply MP grease to a new oil seal lip.