Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
a. Remove the heat protective insulators from the expansion valve and the suction tube.
b. Remove the liquid line tube from the expansion valve.
Torque: 14 N.m (140 kgf.cm. 10 ft.lbf)
ASSEMBLY HINT: Lubricate a new O-ring with compressor oil and install the tube.
c. Remove the clamp, then separate the heat-sensing-tube from the suction tube.
d. Remove the expansion valve from the inlet of the evaporator.
ASSEMBLY HINT: Lubricate a new O-ring with compressor oil and install the tube.
Torque: 23 N.m (230 kgf.cm, 17 ft.lbf)
ASSEMBLY HINT: Connect the line, as shown in the illustration.
COOLING UNIT ASSEMBLY
Assembly is in the reverse order of disassembly.
See: Evaporator Core/Testing and Inspection