Previa Van LE 4WD L4-2438cc 2.4L DOHC SC MFI (1997)
B.
Remove the 6 bolts, washers and nuts.
C.
Insert a screwdriver through the flexible coupling hole (from the flexible coupling side to the bearing shaft flange side), then apply rotational
force to disengage the flexible coupling collars from the bearing shaft.
NOTE:
Hold the bearing firmly to prevent it from falling.
D.
Remove the bearing shaft assembly.
NOTE:
^
Do not damage the centering pin.
^
If work is stopped at this time, cover the centering section with a shop rag.
