Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Crankshaft Main Bearing: Specifications
CRANKSHAFT
The crankshaft bearing cap bolts are tightened in 2 progressive steps.
Step 1:
Install and uniformly tighten the 10 crankshaft bearing cap bolts in the sequence shown in the illustration.
Torque.......................................................................................................................................................................................40 Nm (408 kgf-cm, 30 ft-lbf)
Step 2:
Mark the front of the bearing cap bolts with paint.
Tighten the bearing cap bolts 90° in the sequence shown in step 1.
Check that the paint marks are now at a 90° angle to the front.
Check that the crankshaft turns smoothly.
Crankshaft Specifications