Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-719001.png)
Connecting Rod: Specifications
PISTON SUB-ASSEMBLY WITH CONNECTING ROD
The connecting rod cap bolts should be tightened in 2 progressive steps.
Step 1:
Using SST, install and alternately tighten the bolts of the connecting rod cap in several steps.
SST : 09205-16011
Torque.......................................................................................................................................................................................20 Nm (204 kgf-cm, 15 ft-lbf)
Step 2:
Mark the front of the connecting rod cap bolts with paint.
Tighten the cap bolts 90° as shown in the illustration.
Check that the crankshaft turns smoothly.
Connecting Rod Specifications
