toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3269 > < Initial Inspection and Diagnostic Overview|Page 3267
Page 13
background image

HINT
*

DTC communication uses the CAN communication system.

*

*3: If U0235 is output alone, CAN communication is normal. Refer to Dynamic Radar Cruise Control System    See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U0235.

*

*4: If U1119 is output alone, CAN communication is normal. Refer to Lane-keeping Assist System    See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U1119.

(v) Parking Assist ECU / Techstream Display "Advanced Parking Guidance System"

HINT
*

DTC communication uses the CAN communication system.

*

*5: If U1000 is output alone, CAN communication is normal. Refer to Parking Assist System    See: Testing and
Inspection/Diagnostic Trouble Code Tests and Associated Procedures/U Code Charts/U1000.

(w) Millimeter Wave Radar Sensor

HINT
The millimeter wave radar sensor is connected to the CAN communication system, but CAN communication DTCs are not output.

(x) Lane Recognition Camera Sensor

HINT
The lane recognition camera sensor is connected to the CAN communication system, but CAN communication DTCs are not output.

5. DTC COMBINATION TABLE

(a) CAN No. 1 Bus

Initial Inspection and Diagnostic Overview|Page 3269 > < Initial Inspection and Diagnostic Overview|Page 3267