Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1108036.png)
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
Text in Illustration
NG -- REPAIR OR REPLACE CAN BUS BRANCH WIRE OR CONNECTOR (CAN NO. 1 J/C - STEERING ANGLE
SENSOR)
OK -- Continue to next step.
7. CHECK FOR SHORT IN CAN BUS WIRES (CAN NO. 1 J/C - POWER STEERING ECU)
(a) Disconnect the power steering ECU connector.
Text in Illustration
(b) Measure the resistance according to the value(s) in the table below.
