Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1126001.png)
Manifold Pressure/Vacuum Sensor: Service and Repair
Removal
2ZR-FXE EMISSION CONTROL: VACUUM SENSOR: REMOVAL
1. REMOVE NO. 2 CYLINDER HEAD COVER See: Engine, Cooling and Exhaust/Engine/Service and Repair/Removal and Replacement/Engine
Assembly/Removal
2. REMOVE AIR CLEANER CAP SUB-ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
3. REMOVE INLET AIR CLEANER ASSEMBLY See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
4. REMOVE AIR CLEANER CASE See: Fuel Delivery and Air Induction/Throttle Body/Service and Repair/Removal
5. REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR
(a) Disconnect the connector.
(b) Remove the bolt and manifold absolute pressure sensor.
