Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Text in Illustration
(d) Reconnect the integration relay connector.
(e) Reinstall the integration relay.
NG -- REPLACE INTEGRATION NO.2 RELAY See: Main Relay (Computer/Fuel System)/Service and Repair/Removal
OK -- Continue to next step.
4. CHECK HARNESS AND CONNECTOR (INTEGRATION RELAY (EFI MAIN RELAY) - ECM)
(a) Remove the integration relay from the engine room relay block.
(b) Disconnect the integration relay connector.
(c) Disconnect the ECM connector.
(d) Measure the resistance according to the value(s) in the table below.
Standard Resistance (Check for Open):
Standard Resistance (Check for Short):
Text in Illustration