Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
_hybrid/Page-1224001.png)
Canister Purge Control Valve: Testing and Inspection
2ZR-FXE EMISSION CONTROL: PURGE VALVE: INSPECTION
1. INSPECT VACUUM SWITCHING VALVE ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard Resistance:
(b) If the result is not as specified, replace the vacuum switching valve assembly.
(c) Check operation of the vacuum switching valve assembly.
(1) Blow air into port E. Check that air does not come out of port F.
(2) Apply battery voltage across the terminals.
(3) Blow air into port E. Check that air comes out from port F.
If the result is not as specified, replace the vacuum switching valve assembly.
