Prius L4-1.8L (2ZR-FXE) Hybrid (2010)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Installation
2ZR-FXE ENGINE CONTROL: ENGINE COOLANT TEMPERATURE SENSOR: INSTALLATION
1. INSTALL ENGINE COOLANT TEMPERATURE SENSOR
(a) Install the engine coolant temperature sensor through a new gasket.
Torque : 20 Nm (200 kgf-cm, 14 ft-lbf)
(b) Connect the engine coolant temperature sensor connector.
2. INSTALL RADIATOR WITHOUT CAP RESERVE TANK ASSEMBLY See: Computers and Control Systems/Engine Control Module/Service
and Repair/Installation
3. INSTALL EGR WITH COOLER PIPE SUB-ASSEMBLY
(a) Install the EGR with cooler pipe sub-assembly See: Emission Control Systems/Exhaust Gas Recirculation/EGR Cooler/Service and
Repair/Installation.