toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Components|Page 8276 > < Components
Page 1
background image

Spoiler: Service and Repair
Removal

EXTERIOR: REAR SPOILER: REMOVAL

REMOVAL

HINT:  When removing the spoiler, heat the vehicle body and spoiler using a heat light.

Standard heating temperature:

NOTE:  Do not heat the vehicle body and spoiler excessively.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:  Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat
belt pretensioner activation.

2. REMOVE BACK DOOR CENTER GARNISH See: Doors, Hood and Trunk/Trunk / Liftgate/Service and Repair/Disassembly
3. REMOVE REAR SPOILER

(a) Remove the 3 bolts.

(b) Remove the 3 clips and spoiler.
(c) Disconnect the center stop light connector and remove the rear spoiler.

4. REMOVE CENTER STOP LIGHT

(a) Remove the 2 screws and center stop light.

Components|Page 8276 > < Components