toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

ABS/TCS - ABS/VSC Lights ON/DTC's C1247 & C1310|Page 251 > < ABS/TCS - Zero Point Calibration & Sensor Checks|Page 245
Page 1
background image

Traction Control Module: All Technical Service Bulletins
ABS/TCS - ABS/VSC Lights ON/DTC's C1247 & C1310

BRAKES
BROO6-06
REVISED

Title:
M.I.L. "ON" DTC C1247 & C1310: SKID
CONTROL COMPUTER LOGIC CHANGE

Models:
'03 - '05 Sequoia

March 31, 2006

TSB REVISION NOTICE:

^

August 3, 2007: Step 1A of the Calibration Procedure has been updated. 

Previous versions of this TSB should be discarded.

Introduction

Some 2003 - 2005 model year Sequoia vehicles may exhibit the Brake, ABS, and/or VSC warning lights coming ON with DTC C1247 and/or C1310
stored in the skid control computer memory with no problem found. A software change has been made to the skid control computer logic to correct this
condition.

Applicable Vehicles

^

2003 - 2005 model year Sequoia vehicles produced BEFORE the Production Change Effective VINs shown below.

Production Change Information

Parts Information

Warranty Information

Applicable Warranty*:
This repair is covered under the Toyota Comprehensive Warranty. This warranty is in effect for 36 months or 36,000 miles, whichever occurs first, from
the vehicle's in-service date.

* Warranty application is limited to correction of a problem based upon a customer's specific complaint.

ABS/TCS - ABS/VSC Lights ON/DTC's C1247 & C1310|Page 251 > < ABS/TCS - Zero Point Calibration & Sensor Checks|Page 245