Sequoia 2WD V8-4.7L (2UZ-FE) (2003)
Air Bag Control Module: Component Tests and General Diagnostics
Collision / Non-Collision Inspections
INSPECTION
1. Vehicle not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.*
2. Vehicle involved in collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.*
3. Vehicle involved in collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Replace the airbag sensor assembly.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes in Air Bag Systems; Testing and Inspection.
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the airbag sensor assembly.
-
If the SRS has been deployed in a collision.
-
If the airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the airbag sensor assembly.
Collision / Non-Collision Inspections
INSPECTION
1. Vehicles not involved in collision:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.*
2. Vehicles involved in collision and airbag is not deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Do a diagnostic system check.*
3. Vehicles involved in collision and airbag is deployed:
INSPECT SUPPLEMENTAL RESTRAINT SYSTEM
Replace the side and curtain shield airbag sensor assembly.
* Refer to SRS Warning Light Check, and How to Display and Read Diagnostic Trouble Codes in Air Bag Systems; Testing and Inspection.
Replacement Requirements
REPLACEMENT REQUIREMENTS
In the following cases, replace the side and curtain shield airbag sensor assembly.
-
If the side and curtain shield airbag assembly has been deployed in a collision.
-
If the side and curtain shield airbag sensor assembly has been found to be faulty in troubleshooting.
-
If the side and curtain shield airbag sensor assembly has been dropped.
CAUTION: Be sure to follow the correct procedure, for removal and installation of the side and curtain shield airbag sensor assembly.