Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Radiator: Service and Repair
Installation
1UR-FE COOLING: RADIATOR: INSTALLATION
1. INSTALL RADIATOR ASSEMBLY
(a) Install a new O-ring to the drain cock plug.
(b) Install the drain cock plug.
(c) Install the outlet radiator hose into the radiator.
HINT
Install the hose so that the direction of the hose clamp is as indicated in the illustration.
(d) Set the radiator bracket hooks to the radiator support holes.
(e) Install the radiator with the 4 bolts.
Torque : 18 Nm (184 kgf-cm, 13 ft-lbf)
2. INSTALL NO. 1 RADIATOR TO SUPPORT SEAL (for LH Side)
(a) Install the No. 1 radiator to support seal with the 3 clips.
3. INSTALL NO. 1 RADIATOR TO SUPPORT SEAL (for RH Side)
(a) Install the No. 1 radiator to support seal with the 3 clips.