Sequoia 4WD V8-4.6L (1UR-FE) (2010)
Removal
HEATING / AIR CONDITIONING: CONDENSER (w/o Air Cooled Transmission Oil Cooler): REMOVAL
1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM See: Service and Repair
2. REMOVE RADIATOR ASSEMBLY (for 1UR-FE)
(a) Remove the radiator assembly See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
3. REMOVE RADIATOR ASSEMBLY (for 3UR-FE)
(a) Remove the radiator assembly See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
4. REMOVE RADIATOR ASSEMBLY (for 3UR-FBE)
Remove the radiator assembly See: Engine, Cooling and Exhaust/Cooling System/Radiator/Service and Repair/Removal.
5. DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE
(a) Remove the bolt and disconnect the discharge hose from the cooler condenser.
(b) Remove the O-ring from the discharge hose.
NOTICE:
Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.
6. DISCONNECT AIR CONDITIONING TUBE ASSEMBLY