Sequoia 4WD V8-4.6L (1UR-FE) (2010)
(b) Remove the windshield outside moulding.
HINT
Make a partial cut in the windshield outside moulding. Then pull and remove it by hand.
30. REMOVE WINDSHIELD OUTSIDE UPPER MOULDING
(a) Using a knife, cut off the windshield outside upper moulding as shown in the illustration.
NOTICE:
Do not damage the vehicle body with the knife.
(b) Remove the windshield outside upper moulding.
HINT
Make a partial cut in the windshield outside upper moulding. Then pull and remove it by hand.
31. REMOVE WINDSHIELD GLASS
(a) Apply protective tape to the installation area on the windshield glass on the vehicle body.
HINT
Apply protective tape to the installation surface to prevent it from being scratched.
(b) Pass a piano wire between the vehicle body and glass from the interior.