Sequoia 4WD V8-4.6L (1UR-FE) (2010)
17. REMOVE NO. 1 ROOM LIGHT ASSEMBLY (w/ Rear Seat Entertainment System) See: Body and Frame/Interior Moulding /
Trim/Headliner/Service and Repair/Removal
18. REMOVE VISOR BRACKET COVER RH See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
19. REMOVE VISOR BRACKET COVER LH
HINT
Use the same procedure as for the RH side.
20. REMOVE VISOR ASSEMBLY RH (w/o Illumination) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
21. REMOVE VISOR ASSEMBLY LH (w/o Illumination)
HINT
Use the same procedure as for the RH side.
22. REMOVE VISOR ASSEMBLY RH (w/ Illumination) See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
23. REMOVE VISOR ASSEMBLY LH (w/ Illumination)
HINT
Use the same procedure as for the RH side.
24. REMOVE ASSIST GRIP SUB-ASSEMBLY See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
25. REMOVE ASSIST GRIP PLUG See: Body and Frame/Interior Moulding / Trim/Headliner/Service and Repair/Removal
26. REMOVE ROOF HEADLINING ASSEMBLY
HINT
It is not necessary to remove the roof headlining completely. Slightly lower the front section of the roof headlining.
27. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/ EC Mirror) See: Body and Frame/Mirrors/Service and Repair/Inner Rear View
Mirror/Removal
28. REMOVE INNER REAR VIEW MIRROR ASSEMBLY (w/o EC Mirror) See: Body and Frame/Mirrors/Service and Repair/Inner Rear View
Mirror/Removal
29. REMOVE WINDSHIELD OUTSIDE MOULDING
(a) Using a knife, cut off the windshield outside moulding, as shown in the illustration.
NOTICE:
Do not damage the vehicle body with the knife.