toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Power Windows/Moonroof|Page 8838 > < Body - Power Windows/Moonroof
Page 2
background image

3.

Pull and hold up the Driver's Door Power Window switch until the window closes. Continue holding the switch for approximately one second until
the switch changes from blinking to a constant illumination.

4.

Check for proper operation of the "One-touch open/close" by pushing the switch briefly to the "DOWN" and "UP" positions.

NOTE:

Jam protection function becomes effective through the above initialization procedure.

Moon Roof 

With ignition switch in the "ON" position, do the following:

1.

Push and hold the "TILT UP" side of the switch until the Moon Roof tilts all the way up and stops.

2.

Check for proper operation of the "One-touch slide open/close" and "One-touch tilt up/down" functions by pushing the switch briefly to the
"SLIDE OPEN" and "TILT UP" positions.

Body - Power Windows/Moonroof|Page 8838 > < Body - Power Windows/Moonroof