toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Body - Power Windows/Moonroof|Page 8837 > < Electrical - Power Window/Roof Initialization Procedure|Page 8830
Page 1
background image

Sunroof / Moonroof Switch: Technical Service Bulletins
Body - Power Windows/Moonroof

PRODUCT GENERAL INFORMATION
PG004-03

March 14, 2003

Title:
DRIVER'S DOOR POWER WINDOW AND MOON ROOF INITIALIZATION

Models:
'04 Sienna

Introduction 

This bulletin outlines the initialization procedure for the Driver's Door Power Window and the Moon Roof on the 2004 model year Sienna.

If the battery has been disconnected, the ECU will not be able to detect and memorize the Driver's Door Power Window and Moon Roof positions,
resulting in the following features being inoperative.

^

One-touch open and close of Driver's Door Power Window with jam protection.

^

One-touch slide open and close of Moon Roof with jam protection.

^

One-touch tilt up and down of Moon Roof with jam protection. Please use the following initialization procedure whenever the battery has been
disconnected.

Applicable Vehicles
^

2004 model year Sienna vehicles.

Warranty Information

Initialization Procedure

Driver's Door Power Window 

With ignition switch in the "ON" position, do the following:

1.

At this time the power window switch for the driver's door window should be blinking.

2.

Push down and hold the Driver's Door Power Window switch to completely open the window.

Body - Power Windows/Moonroof|Page 8837 > < Electrical - Power Window/Roof Initialization Procedure|Page 8830