Sienna AWD V6-3.5L (2GR-FE) (2007)
/Page-1714005.png)
a. Using a screwdriver, disengage the 3 clips and 2 claws, and remove the scuff plate.
HINT: Tape the screwdriver tip before use.
2. REMOVE FRONT DOOR SCUFF PLATE LH
3. REMOVE REAR DOOR SCUFF PLATE RH
a. Using a screwdriver, disengage the 8 clips and remove the scuff plate.
HINT: Tape the screwdriver tip before use.
4. REMOVE REAR DOOR SCUFF PLATE LH
5. REMOVE COWL SIDE TRIM BOARD RH
a. Using a screwdriver, disengage the 2 clips and claw, and remove the trim board.
HINT: Tape the screwdriver tip before use.
6. REMOVE COWL SIDE TRIM BOARD LH
7. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
8. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP LH
9. REMOVE REAR DOOR WEATHERSTRIP RH
HINT: When reinstalling the weatherstrip, completely remove the sealer adhering to the opening flange on the body side beforehand.
10. REMOVE REAR DOOR WEATHERSTRIP LH
HINT: When reinstalling the weatherstrip, completely remove the sealer adhering to the opening flange on the body side beforehand.
