Sienna AWD V6-3.5L (2GR-FE) (2007)
(i)
Using a screwdriver, bend the tabs of the lock plate.
(j)
Install the control shaft lever, washer and the nut.
Torque: 13 Nm (130 kgf-cm, 9 ft. lbs.)
(k) Connect the park/neutral position switch connector.
2. CONNECT TRANSMISSION CONTROL CABLE ASSEMBLY
(a)
Connect the control cable to the control shaft lever with the nut.
Torque: 13 Nm (133 kgf-cm, 10 ft. lbs.)