Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-2371002.png)
(a) Remove the power window regulator motor.
(b) Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard:
4. INSPECT POWER WINDOW REGULATOR MOTOR (REAR LH)
(a) Remove the power window regulator motor.
(b) Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard:
