Sienna FWD V6-3.5L (2GR-FE) (2009)
/Page-2371001.png)
Window Regulator: Testing and Inspection
WINDSHIELD / WINDOWGLASS: POWER WINDOW REGULATOR MOTOR: INSPECTION
INSPECTION
1. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT RH)
(a) Remove the power window regulator motor.
(b) Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard:
2. INSPECT POWER WINDOW REGULATOR MOTOR (FRONT LH)
(a) Remove the power window regulator motor.
(b) Apply battery voltage to the motor connector according to the table below.
NOTICE: Do not apply battery to any terminals except terminals 1 and 2.
Standard:
3. INSPECT POWER WINDOW REGULATOR NOTOR (REAR RH)
