Sienna LE V6-3.0L (1MZ-FE) (1998)
d. Install a new O-ring to the throttle cable.
e. Pull in the throttle cable and install the retaining bolt.
Torque: 10 Nm (100 kgf.cm, 7 ft. lbs.)
7. INSTALL VALVE BODY
8. INSTALL PARK/NEUTRAL POSITION SWITCH
9. w/ CRUISE CONTROL:
INSTALL CRUISE CONTROL ACTUATOR
a. Install the cruise control actuator, 3 bolts and connect the connector.
b. Install the battery.
10. CONNECT THROTTLE CABLE TO ENGINE
11. FILL ATF AND CHECK FLUID LEVEL
12. ADJUST THROTTLE CABLE