Sienna LE V6-3.0L (1MZ-FE) (1998)
/Page-1138003.png)
11. REMOVE VALVE BODY
a. Remove the 10 bolts.
b. Disconnect the throttle cable from the cam and remove the valve body.
12. REMOVE 2ND BRAKE APPLY GASKET
13. REMOVE SOLENOID VALVES
a. Remove the 3 bolts and shift solenoid valves No.1 and No.2.
NOTICE: When removing the solenoid, do not use a screwdriver, etc. to pry up the solenoid.
b. Remove the O-ring from each solenoid.
