Sienna LE V6-3.0L (1MZ-FE) (1998)
b. Remove the 5 bolts and manual valve body with the manual valve.
c. Remove the manual valve from the manual valve body.
7. REMOVE OIL PIPES
a. Remove the bolt.
b. Pry up both pipe ends with a large screwdriver and remove the 7 pipes.
8. DISCONNECT SOLENOID CONNECTORS
9. REMOVE CONNECTOR CLAMP AND PIPE RETAINER
10. REMOVE B3 APPLY PIPE
Pry up the pipe with a screwdriver and remove the apply pipe.