Supra L6-2997cc 3.0L DOHC MFI (1998)
e. With your foot still applying onto the brake pedal, push MOTOR switch and check that the brake pedal does not pulsate.
f.
Depress the brake pedal and hold it. As you hold the pedal down, push and hold in the MAIN push switch for a few seconds. Check that the
pedal does not go down.
NOTICE: Do not keep pushing the MAIN push switch more than 10 seconds.
g. With your foot still applying onto the brake pedal, release the MAIN push switch and check that the pedal goes down.
h. With your foot still applying onto the brake pedal, push the MOTOR switch and check that the brake pedal returns.
i.
Release the brake pedal.
6. Inspect for other wheels.
a. Turn the selector switch to the "REAR" position, and inspect the "REAR" wheel.
b. Repeating c) to i) in the step 5, check the actuator operation similarly.
c. Similarly, inspect "FRONT RH" wheel.
HINT: When inspecting the "FRONT RH" wheel, push the FRONT LH switch instead of the MAIN push switch.
This makes it possible to inspect wherever the selector switch position indicates.
7. Push motor switch.
a. Push and hold in the MOTOR switch for a few seconds.
b. Stop the engine.
8. Disconnect actuator checker SST 09990-00150, 09990-00250, 09990-00300, 09990-00360, 09990-00420 from actuator.
a. Disconnect the actuator checker (SST) and sub-wire harnesses (SST) from the actuator.
b. Connect the actuator connector.
c. Clear the DTC.
