Supra L6-2997cc 3.0L DOHC MFI (1998)
4. EXAMINE PARTICLES IN PAN
Remove the magnets and use them to collect any steel chips. Look carefully at the chips and particles in the pan and the magnet to anticipate what
type of wear you will find in the transmission.
-
Steel (magnetic): bearing, gear and plate wear
-
Brass (non-magnetic): bushing wear
5. REMOVE OIL STRAINER
Remove the 3 bolts and oil strainer from the valve body.
6. REMOVE SOLENOID WIRING
a. Remove the 2 bolts and clamp.
b. Remove the 2 set bolts of the clamp and disconnect the ATF Temp. sensor.