Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
8. CONNECT NO.1 OIL PIPE
a. Install the union bolt to the oil control valve filter.
NOTICE: In case of touching the filter, avoid holding the mesh part and hold the frame part.
b. Install the oil pipe with 2 new gasket and the union bolt to the No.3 camshaft bearing cap.
Torque: 55 Nm (41 ft. lbs.)
9. INSTALL CAMSHAFT TIMING OIL CONTROL VALVE
10. INSTALL NO.1 CYLINDER HEAD COVER
a. Install the cylinder head and gasket with the 6 bolts and 2 nuts.
Torque: 8.5 Nm (75 inch lbs.)
b. Install the high-tension cords and clamps with the 2 bolts.
Torque: 8.0 Nm (71 inch lbs.)
c. Using a 5 mm hexagon wrench, install the engine wire protector with the bolt and nut.
11. INSTALL THROTTLE BODY AND INTAKE AIR CONNECTOR ASSEMBLY
12. INSTALL EXHAUST CAMSHAFT TIMING PULLEY
a. Align the camshaft knock pin with the groove on the pulley, and slide on the timing pulley.
b. Slide the timing pulley on the camshaft, facing the front mark forward.
c. Using Special Service Tool (SST), install the pulley bolt.
SST 09960 - 10010 (09962 - 01000, 09963 - 01000)
Torque: 81 Nm (60 ft. lbs.)
