Supra Sport Roof L6-2997cc 3.0L DOHC MFI (1998)
d. Using SST, align the dot mark on the camshaft timing timing pulley with the timing mark of the No.4 timing belt cover.
SST 09960 - 10010 (09962 - 01000, 09963 - 01000)
13. CONNECT TIMING BELT TO CAMSHAFT TIMING PULLEYS
HINT:
(When re-using timing belt):
^
Check that the matchmark on the timing belt matches the end of the No.1 timing belt cover.
If the matchmark does not align, shift the meshing of the timing belt and crankshaft timing pulley until they align.
^
Align the matchmarks of the timing belt and camshaft timing pulleys.
a. Remove any oil or water on the camshaft timing pulley, and keep it clean.
b. Install the timing belt, checking the tension between the crankshaft timing pulley and intake camshaft timing pulley.
14. SET TIMING BELT TENSIONER
a. Using a press, slowly press in the push rod using 981 - 9,807 N (220 - 2,205 lbs.) of force.
b. Align the holes of the push rod and housing, pass a 1.5 mm hexagon wrench through the holes to keep the push rod retracted.
c. Release the press.
