T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
Clutch Master Cylinder: Service and Repair
Overhaul
DISASSEMBLY
1. Remove reservoir tank, as follows:
a. Using a pin punch and hammer, drive out the slotted spring pin.
b. Remove the reservoir tank and grommet.
2. Remove push rod. Pull back the boot, and using snap ring pliers, remove the snap ring.
3. Remove piston.
ASSEMBLY
1. Coat parts with lithium soap base glycol grease, as shown
2. Insert piston into cylinder.
3. Install push rod assembly with snap ring.
4. Install reservoir tank, as follows:
a. Install the reservoir tank and a new grommet.
b. Using a pin punch and hammer, drive in the slotted spring pin.