T100 Extra Cab Pickup 4WD V6-3.4L (5VZ-FE) (1997)
Clutch Master Cylinder: Service and Repair
Replacement
REMOVAL
1. Draw out fluid with syringe.
2. Disconnect clutch line. Using Special Service Tool (SST) 09023-00100 or equivalent, disconnect the line. Use a container to catch the fluid.
Torque: 15 N.m (11 ft. lbs.).
3. Remove clip and clevis pin.
4. Remove mounting nuts and pull out master cylinder.
Torque: 12 N.m (108 inch lbs.).
INSTALLATION
Installation is in the reverse order of removal.
NOTE: After installation, bleed system and adjust clutch pedal.