T100 Pickup 4WD V6-180.5 2959cc 3.0L SOHC (3VZ-E) (1993)
No. 2 Timing Belt Cover Removal
7.
Remove spark plug wire retainers and the 11 bolts holding the No. 2 timing belt cover.
Fig. 6 Aligning Timing Marks
8.
Place No. 1 cylinder at TDC of compression stroke by turning the crankshaft pulley and aligning pulley groove with the ``0'' mark on the No. 1
timing belt cover. Ensure alignment marks on the camshaft timing sprockets and the No. 3 timing belt cover are correctly aligned, Fig. 6.
Camshaft Matchmarks Alignment
9.
If not, turn the crankshaft pulley one complete revolution.
10.
Remove timing belt tensioner by loosening the 2 bolts alternately, then remove them, the belt tensioner and dust boot.