Tacoma 2WD L4-2.7L (2TR-FE) (2005)
/Page-885004.png)
6. INSPECT STARTER YOKE ASSEMBLY
a. Check the resistance.
1. Using an ohmmeter, check the resistance between the lead wire and brushes.
Standard: 1 Ohms or lower
If the result is not as specified, replace the starter yoke.
b. Check the resistance.
1. Using an ohmmeter, check the resistance between shunt coil terminals (A) and (B).
Standard: 1.5 to 1.9 Ohms at 20 °C (68 °F)
If the result is not as specified, replace the starter yoke.
7. INSPECT BRUSH
a. Check the brush length.
