Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
b. Disconnect the water hoses from the heater radiator pipes.
HINT:
At the time of installation, please refer to the following items.
-
Push the water hose onto the heater radiator pipe as far as the second ridge on the pipe.
-
Install the hose clip in the position, as shown in the illustration.
4. REMOVE INSTRUMENT PANEL AND REINFORCEMENT
5. REMOVE DEFROSTER NOZZLE AND HEATER TO REGISTER DUCT
6. DISCONNECT AIR OUTLET SERVOMOTOR CONNECTOR
7. DISCONNECT AIR MIX SERVOMOTOR CONNECTOR
8. REMOVE HEATER UNIT
Remove the 2 bolts, nut and heater unit.
INSTALLATION
Installation is in the reverse order of removal.