Tacoma 4WD L4-2.7L (3RZ-FE) (2004)
Heater Core Case: Service and Repair
Disassembly and Reassembly
DISASSEMBLY
1. REMOVE AIR MIX SERVOMOTOR
2. REMOVE AIR OUTLET SERVOMOTOR
3. REMOVE HEATER RADIATOR
a. Remove the 5 screws and 2 plates and clamp.
b. Pull out the heater radiator.
c. Remove the 2 screws and 2 clips, then disconnect the heater radiator pipes.
HINT: At the time of reassembly, please refer to the following item.
Do not reuse 2 O-rings.
4. REMOVE AIR VENT DUCT
Remove the 2 screws and duct.
REASSEMBLY
Reassembly is in the reverse order of disassembly.