Tacoma 4WD V6-4.0L (1GR-FE) (2006)
/Page-459013.png)
6. REMOVE V-BANK COVER
7. REMOVE RADIATOR SUPPORT TO FRAME SEAL LH
8. REMOVE FAN SHROUD
9. REMOVE AIR CLEANER ASSEMBLY
10. REMOVE OIL LEVEL GAGE GUIDE
a. Remove the oil level gauge.
b. Remove the bolt and pull out the oil level gauge guide.
c. Remove the O-ring from the oil level gauge guide.
11. REMOVE WATER INLET
12. SEPARATE VANE PUMP ASSEMBLY
a. Disconnect the power steering pressure switch connector.
b. Remove the 2 bolts, then separate the vane pump.
NOTICE: Do not hit the pulley with other parts when separating the vane pump.
HINT: The vane pump is suspended securely.
13. REMOVE GENERATOR ASSEMBLY
14. SEPARATE COOLER COMPRESSOR ASSEMBLY
15. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY
a. Remove the 5 bolts, then remove the V-ribbed belt tensioner.
16. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY
a. Remove the 2 bolts, then remove the idler pulley No. 2.
17. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY
a. Remove the bolt, then remove the idler pulley No. 1.
18. REMOVE CRANKSHAFT PULLEY
a. Using SST, hold the crankshaft pulley and loosen the pulley set bolt.
SST 09213-54015 (91651-60855), 09330-00021
