Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
7. REMOVE INTAKE AIR CONNECTOR
8. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY
a. Disconnect the ignition coil connectors.
b. Disconnect the throttle with motor body connector.
c. Disconnect the VSV connector.
d. Disconnect the camshaft position sensor connector.
e. Disconnect the engine wire harness clamps.
f.
Remove the bolts, then remove the ignition coils.
g. Disconnect the ventilation hose.
h. Remove the 19 bolts and 2 nuts, then remove the cylinder head cover.