Tacoma PreRunner L4-2.7L (2TR-FE) (2005)
9. REMOVE TIMING CHAIN GUIDE
a. Remove the 2 bolts, then remove the timing chain guide.
b. Remove the O-ring.
10. REMOVE CAMSHAFT
a. Set the No.1 cylinder to the TDC/compression.
(1) Turn the crankshaft pulley clockwise and align its timing mark notch with the timing mark "0".
(2) Check that the timing marks of the camshaft timing gear are located as illustrated.
HINT: If not, turn the crankshaft to align the marks.