Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
/Page-1039001.png)
Heater Control Valve: Testing and Inspection
WATER VALVE
ON-VEHICLE INSPECTION
1. WARM UP ENGINE
2. DISCONNECT WATER VALVE CONTROL CABLE
3. INSPECT WATER VALVE OPERATION
a. Check that warm air blown out the vent when the water valve lever is moved to "WARM" position.
b. Check that cool air blown out when the water valve is moved to the "COOL" position.
If operation is not as specified, replace the water valve.
4. CONNECT WATER VALVE CONTROL CABLE
After connection, adjust the control cable.
