Tacoma PreRunner Dbl Cab 2WD V6-3.4L (5VZ-FE) (2001)
Expansion Valve: Service and Repair
REMOVAL
1. REMOVE EVAPORATOR
2. REMOVE EXPANSION VALVE
Using a hexagon wrench, remove the 2 bolts and separate the expansion valve and evaporator and tubes.
Torque: 5.4 N.m (55 kgf.cm, 48 in.lbf)
HINT: At the time of installation, please refer to the following item.
Lubricate 4 new O-rings with compressor oil and install the tubes and valve.
INSTALLATION
Installation is in the reverse order of removal.