Tercel/Corolla Timing Belt Removal Instructions
NOTE: Remove any oil or water on the camshaft timing pulley and keep it clean.
2. Install crankshaft timing pulley.
Install the crankshaft timing pulley and align the TDC marks on the oil pump body and crankshaft timing pulley.
NOTE: Remove any oil or water on the crankshaft timing pulley and keep it clean.
3. Install timing belt idler pulley.
(a) Temporarily install the timing belt idler pulley with the mount bolt.
(b) Install the tension spring.
(c) Pry the timing belt idler pulley toward the left as far as it will go and temporarily tighten it.
NOTE: Remove any oil or water on the idler pulley and keep it clean.
4. Install timing belt.
NOTE: If reusing the timing belt, align the points marked during removal and install the belt with the arrow pointing in the direction of engine
revolution.
5. Check valve timing and timing belt tension.
