Tercel/Cor. Tercel L4-1452cc 1AC,3A,3AC (1984)
(a) Loosen the mount bolt of the timing belt idler pulley.
(b) Temporarily install the crankshaft pulley mount bolt and turn the crankshaft two revolutions from TDC to TDC.
CAUTION: Always turn the crankshaft clockwise.
(c) Check the valve timing.
Insure that each pulley aligns with the marks as shown in the figure.
(d) Tighten the mount bolt of the timing belt idler pulley.
Torque: 375 kg-cm (27 ft-lb, 37 N.m)
(e) Measure the timing belt tension as shown in the figure.
Timing belt tension: 6 - 7 mm at 2 kg (0.24-0.28 in. at 4.4 lb, 20 N)
