Tercel Sedan 2-Door L4-1456cc 1.5L SOHC (3E-E) (1991)
/Page-636003.png)
c. Remove the piston return spring.
5. REMOVE CLUTCH PISTON
a. Apply compressed air into the oil passage to remove the piston.
If the piston does not come out, use needle-nose pliers to remove it.
b. Remove the two O-rings from the piston.
6. IF NECESSARY, REMOVE OIL SEAL RINGS
Remove the two oil seal rings from the shaft.
INSPECTION OF FORWARD CLUTCH
