toyota Workshop Repair Guides

Toyota Workshop Service and Repair Manuals

Direct Clutch|Page 1681 > < Direct Clutch|Page 1679
Page 2
background image

SST 09350-32013 (09351-32190)

Piston stroke: 1.11 - 1.47 mm (0.0437 - 0.0579 in.)

If the piston stroke is greater than the maximum, inspect the each component.

2. REMOVE SNAP RING FROM CLUTCH DRUM

3. REMOVE FLANGE, DISCS AND PLATES

4. REMOVE PISTON RETURN SPRING

a. Place SST on the spring retainer and compress the springs with a shop press.

SST 09350-32014 (09351-32070)

b. Remove the snap ring with the snap ring pliers.

Direct Clutch|Page 1681 > < Direct Clutch|Page 1679