Tercel Sedan 4-Door L4-1456cc 1.5L SOHC (3E) (1994)
6. REMOVE NO.1 HUB SLEEVE ASSEMBLY, 1ST GEAR, SYNCHRONIZER RING, NEEDLE ROLLER BEARING, THRUST WASHER
AND LOCKING BALL
a. Using a press, remove No.1 hub sleeve, 1st gear and synchronizer ring.
b. Remove the needle roller bearing, thrust washer and locking ball.
7. REMOVE NO.1 HUB SLEEVE, SHIFTING KEYS AND SPRINGS FROM NO.1 CLUTCH HUB
Using a screwdriver, remove the 3 shifting keys and springs from No.1 clutch hub.